Camera Solutions for Automotive Applications

Your Connection to all Camera Applications for ADAS and Autonomous Driving Technologies

Rosenberger has developed compact camera connectors designed for high data rates in LiDAR, radar, and both interior and exterior camera applications including surround view, front, rear, and mirror cameras. These all-in-one, future-proof coaxial interfaces FAKRA, HFM^®, RMC^®, pigtail variants, and housings in metal or plastic can be tailored with PCB bullets, with or without tolerance compensation, depending on technical requirements. Adaptable and scalable modular systems enable increased efficiency and cost optimization through a high degree of automation.

Our products are engineered for performance, reliability, and ease of assembly in high-density electronic environments.

Product Portfolio

Coaxial FAKRA Interfaces
Coaxial HFM^® Interfaces
Coaxial RMC^® Interfaces
PCB connectors with or without tolerance compensation
Various Materials - Modular Combinations
Housings One/Two-Piece-Solutions: metal or plastic
DirectLink Pigtail connectors
Optional with power pins (MQS)

Features

Impedance 50 Ω
Mating cycles ≤ 10
Interfaces to the wiring harness:
HFM^® Frequency range up to 20 GHz
RMC^® Frequency range up to 9 GHz
FAKRA Frequency range up to 6 GHz

Benefits

All-in-one solutions: connector, housing, PCB bullet
Tailored housings according to customer specifications, sealed or unsealed in unmated condition
Connectors with or without tolerance compensation, full backhousing, flange or space-optimazed pigtail options
Scalable power supply due to MQS pins
Different housing materials available
Maximum robustness and EMC shielding in versatile designs
Flexible mounting height of the PCB in the camera housing possible
Adaptable and scalable modular systems
Efficiency through a high level of automation

With or Without Tolerance Compensation dependent on the Technical Solution

Choose with or without tolerance compensation – depending on your technical solution. Our modular design allows easy integration with customized back housings and adaptor/bullet combinations, ensuring a perfect fit for your application.

Our coaxial interfaces FAKRA, HFM^®, and RMC^® ensure broad compatibility and future-proof design. With built-in tolerance compensation capabilities and SMD PCB footprints.

Tolerance compensation in Z direction of ±0.5 mm
Mating cycles ≤ 10
Engagement force ≤ 25 N
Impedance 50 Ω

Tolerance compensation in X, Y and Z direction of ±0.5 mm and max. 1.5° tilting angle
Mating cycles ≤ 10
Engagement force ≤ 10 N
Impedance 50 Ω

Various Materials – Modular Combinations

Rosenberger offers various material options for camera and interface housings, such as metal and plastic, as well as modular combinations.

Backhousing/Interface Housing Metal e.g. Aluminum

Excellent EMC shielding
Mechanically robust

Backhousing/Interface Housing Plastic

Optional EMC shielding

Backhousing Metal & Interface Housing Plastic

Excellent EMC shielding
Modular base for various interface solutions
Cost optimized

Layout Recommendation – SMD Footprint

Surface-mount devices (SMDs) are compact components that are soldered directly onto the PCB.
Their high-frequency performance and connection quality depend on several factors, including substrate thickness and board design.
Rosenberger provides detailed layout recommendations and optimized footprints to ensure reliable performance and manufacturability.

Recommended SMD Footprint

One document MB_764 for both PCB connectors 99K10A-40MT5 and 99S10K-40MT5
Application optimized PCB footprint available on request

Rosenberger No. 99K10A-40MT5

Rosenberger No. 99S10K-40MT5

Space-Optimized Connectivity for Driver Monitoring Systems

“DirectLink” pigtail connectors in a compact size – 10 mm smaller than common standard versions – enable flexible installation in highly constrained environments.

Integrating driver monitoring cameras into tight spaces such as the steering column, rearview mirror, or A-pillar requires advanced connector solutions.
Rosenberger addresses this challenge with newly designed “DirectLink” pigtail connectors in customer-specific requirements, based on the proven HFM^® series and standard PCB connector.

“DirectLink” Pigtails - Wire-to-Board Solutions optional with Power Pins
The fully assembled pigtail solution ensures reliable data transmission and scalable power supply (MQS pins) up to the interface within the vehicle wiring harness. It supports all common cable-side interfaces including FAKRA, HFM^®, and RMC^®.

Thanks to a fully automated assembly process, the solution offers excellent repeatability and cost-efficient manufacturing, making it ideal for large-scale deployment in driver assistance applications.

"DirectLink" Pigtail-PCB-Connections - Customer Specific Solutions

Features & Benefits

Compact size – 10 mm smaller than common standards
Space optimized solutions for demanding packaging situation
Right angle connector with new design
Data and power transmission
Delivery option for the complete camera connection system integrated within the cable assembly
Tolerance compensation possible
Internal interface based on HFM^®
Different interfaces on cable side (FAKRA, HFM^®, RMC^®)
Fully automated cable assembly process

Applications

LiDAR and radar, camera applications examples:

Surroundview (park assist)
Interior (attention assist)
Front (trafffic sign, detection, emergency)
Rear (collision warning)
Mirror (blind spot)

Flyer Download

Modular Camera Solutions - Flyer pdf Camera - Presstext EN pdf Camera - Technical Article EN pdf

Get in touch with us

"With our Camera Solutions for Automotive Applications, we bring performance, reliability, and ease of assembly in high-density electronic environments.

I’d be happy to share more insights into the capabilities of this technology. Let’s collaborate to find the perfect solution for your connection to your camera applications."

Thomas Miedl
Head of Product Management Team “Camera”